MOTUL SYSTEM KEEP CLEAN GASOLINE 300ML is a preventive additive cleaner designed to be used in all types of gasoline engine with injection or carburettor, naturally aspirated or turbocharged, with or without catalytic converter, using all kind of gasoline fuels, leaded or unleaded, LPG, Ethanol and biofuels. SYSTEM KEEP CLEAN GASOLINE is a gasoline additive compatible with E10 fuels (Ethanol 10%).
MOTUL SYSTEM KEEP CLEAN GASOLINE effectively maintains cleanliness and cleans dirtying and clogging which appear in the whole fuel system:
– injector nozzle fouling
– condensation in the fuel system
– gumming in the injector or carburetor
– dirtying of combustion chambers and inlet valves
MOTUL SYSTEM KEEP CLEAN GASOLINE provides a perfect lubrication during cleaning process and prevents removed micro-particles from depositing.
PERFORMANCES
A clean fuel system is a necessary condition for an effective engine functioning. MOTUL SYSTEM KEEP CLEAN GASOLINE allows to:
• clean the carburettors or the injectors (for a better atomisation)
• prevent the formation of deposits and varnishes on inlet valves and in combustion chambers
• disperse condensation water in order to avoid any fuel system oxidation
A regular use of MOTUL SYSTEM KEEP CLEAN GASOLINE will provide:
• Preservation of original engine performance and performance
• Reduction of fuel consumption and pollutant emissions (recommended before technical inspection)
• Easy cold start and better driving pleasure
• Increased life duration of injection systems and catalytic converters.
RECOMMENDATIONS
Directly pour one can of MOTUL SYSTEM KEEP CLEAN GASOLINE in the gasoline tank before refuelling, the fuel system will be then completely cleaned, from the tank to the injector and the combustion chamber.
A can of MOTUL SYSTEM KEEP CLEAN GASOLINE is sufficient for tank capacity up to 50 litres. Do not exceed prescribed dose. If necessary, proceed to 2 successive treatments.
To maintain the benefits of cleaning, use regularly MOTUL SYSTEM KEEP CLEAN GASOLINE.
MOTUL ENGINE FLUSH 300ML is designed to be used in all types of Gasoline and Diesel engines, naturally aspirated or turbocharged, with or without after treatment systems, using all kind of fuels. MOTUL ENGINE FLUSH effectively cleans deposits and clogging which appear in the engine. The removed micro-particles are then evacuated at the time of the oil drain. MOTUL ENGINE FLUSH provides a perfect lubrication during cleaning process.
PERFORMANCES
MOTUL ENGINE FLUSH, added to engine oil before draining, allows to:
•reduce the wear
•decrease oil and fuel consumption
•increase compressions on all cylinders in the same way
•decrease exhaust pollutants emissions
•evacuate deposits, varnishes and other combustion residues from sensitive areas such as hydraulics lifters or piston grooves and rings
•take maximum benefit of fresh oil which will fill engine after draining
•increase catalytic converter’s, GPF’s and DPF’s lifetime.
RECOMMENDATIONS
Before each oil drain, add in the engine a can of ENGINE FLUSH to hot used oil. Let the engine run at idle for 15 minutes.
Drain the oil and change the oil filter.
The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE FLUSH is to be added per additional litre of engine oil (over 5 litres). Do not exceed the recommended proportion. If necessary, proceed to
2 successive treatments. Combined with fuel cleaner products such as INJECTOR CLEANER or SYSTEM KEEP CLEAN, the pre-drain additive ENGINE FLUSH provides a very sensitive reduction of pollutants emissions to pass Vehicle Inspection.
