MOTUL SYSTEM KEEP CLEAN DIESEL 300ML is a preventive additive cleaner designed to be used in all types of Diesel injection systems, with indirect or direct injection, naturally aspirated or turbocharged, with or without DPF (Diesel Particulate
Filter) and with or without SCR (Selective Catalytic Reduction) systems.
SYSTEM KEEP CLEAN DIESEL is a Diesel additive compatible with Biodiesel fuels such as B7 (7% Biodiesel) and B10 (10% Biodiesel).
MOTUL SYSTEM KEEP CLEAN DIESEL effectively maintains cleanliness and cleans dirtying and clogging which appear in the whole Diesel fuel injection system:
– injector nozzle fouling
– condensation in the fuel system
– gumming in the injection pump
– dirtying of combustion chambers and inlet valves
MOTUL SYSTEM KEEP CLEAN DIESEL provides a perfect lubrication during cleaning phase and prevents removed micro-particles from depositing. Moreover, it prevents from Diesel fuel oxidation and micro-organisms formation.
PERFORMANCES
A clean fuel system is a necessary condition for an effective engine functioning.
MOTUL SYSTEM KEEP CLEAN DIESEL allows to:
• Clean the injectors (for better diesel spraying) and the high pressure pump
• Avoid formation of deposits on the intake valves and in the combustion chamber
• Disperse the condensation water to prevent oxidation of the injection system
The use of MOTUL SYSTEM KEEP CLEAN DIESEL will ensure:
• Preservation of original engine power and performance
• Reduction of fuel consumption and emissions of exhaust pollutants (smoke, soot ...)
• Easy cold start and better driving pleasure
• Increased life of injection system and post-treatment systems
• Maintaining engine reliability
RECOMMENDATIONS
Pour one whole can of MOTUL SYSTEM KEEP CLEAN DIESEL in the Diesel tank before refueling, the fuel system will be then completely cleaned, from the tank to the injector and the combustion chamber. A can is sufficient for tanks up to 50 liters. Do not exceed the recommended proportion. If necessary, proceed to 2 successive treatments.
To maintain the benefits of cleaning, use MOTUL SYSTEM KEEP CLEAN DIESEL regularly.
MOTUL ENGINE FLUSH 300ML is designed to be used in all types of Gasoline and Diesel engines, naturally aspirated or turbocharged, with or without after treatment systems, using all kind of fuels. MOTUL ENGINE FLUSH effectively cleans
deposits and clogging which appear in the engine. The removed micro-particles are then evacuated at the time of the oil drain.
MOTUL ENGINE FLUSH provides a perfect lubrication during cleaning process.
PERFORMANCES
MOTUL ENGINE FLUSH, added to engine oil before draining, allows to:
•reduce the wear
•decrease oil and fuel consumption
•increase compressions on all cylinders in the same way
•decrease exhaust pollutants emissions
•evacuate deposits, varnishes and other combustion residues from sensitive areas such as hydraulics lifters or piston grooves and rings
•take maximum benefit of fresh oil which will fill engine after draining
•increase catalytic converter’s, GPF’s and DPF’s lifetime
RECOMMENDATIONS
Before each oil drain, add in the engine a can of ENGINE FLUSH to hot used oil. Let the engine run at idle for 15 minutes. Drain the oil and change the oil filter.
The content of one can is sufficient for an oil capacity up to 5 litres. For higher capacities, 60 ml of ENGINE FLUSH is to be added per additional litre of engine oil (over 5 litres). Do not exceed the recommended proportion. If necessary, proceed to
2 successive treatments. Combined with fuel cleaner products such as INJECTOR CLEANER or SYSTEM KEEP CLEAN, the pre-drain additive ENGINE FLUSH provides a very sensitive reduction of pollutants emissions to pass Vehicle Inspection.
