LIQUI MOLY Service Kit Super Diesel 300ml & Diesel Purge 500ml 1806+1811

Liqui Moly Diesel Purge 500ml
Combination of active agents with distinctive cleaning properties. The special additives guarantee corrosion protection and increase ignition performance (cetane number).
Properties
- boosts the cetane number
- increases operational reliability
- eliminates diesel knocking
- reduces deposits
- cleans the fuel system
- good corrosion protection
- guarantees optimum combustion
- highly economical
Areas of application
Used for all diesel engines to prevent and eliminate problems associated with uneven idling and partialload knocking. Quantity to be used for preventive and remedial use: 500 ml is sufficient upto 75 litres of diesel
Application
Preventive use Add to diesel fuel according to the inspection intervals.Remedial use Unclip the fuel pipe and immerse the end in the Diesel Purge. Close the fuel return pipe or feed that into the Diesel Purge. Start the engine and allow the engine to run at different speeds with the Diesel Purge unmixed. After the cleaning process, assemble the vehicle's system. In extreme cases, repeat the cleaning procedure if necessary.

Liqui Moly Super Diesel 300ml
A combination of agents which cleans, disperses, protects materials and boosts the cetane number. The lubricity enhancer contained provides sufficient lubricity for diesel fuels low in sulfur. Due to the increased ignition performance, the fuel shows better combustion behavior when the engine is cold and unpleasant odors in the exhaust gases are reduced.
Properties
- keeps the fuel system clean
- for low-sulfur diesel fuels
- keeps injection nozzles clean
- tested for catalytic converters
- prevents seizing and the injector needles from gumming up
- boosts the cetane number
- optimizes engine performance
- increases the lubricating effect
- excellent cleanliness
- prevents the build-up of deposits
- good corrosion protection
- guarantees low fuel consumption
- high wear resistance
Areas of application
Added to diesel fuel for all diesel engines, particularly in modern high pressure diesel engines in passenger cars, trucks, tractors, construction machinery and stationary engines. Ideally suitable for preserving engines when decommissioned for long periods under extreme conditions. Tested for compatibility with turbochargers.
Application
The increase in ignition performance and improvement of the lubricating effect by lubricity enhancers is achieved by adding the product to low-sulfur diesel fuels on a continual basis. One 250 ml can is sufficient for 75 l of diesel fuel. Dosage: 1:300. Clean injectors and corrosion protection by adding to the diesel tank every 2,000 km. 5 l canisters and 50 l drums for trucks, transport companies, bus companies and industry. The dosage rate is in the proportion 1:300 additive to diesel fuel. When decommissioning and preserving engines, add to the diesel fuel at a rate of 1 %. Follow the instructions on preservation. Can be mixed with fuel at any time since mixing takes place automatically.