DINITROL 445 is a permanent corrosion and stone chip protection based on synthetic resin/plastic. The product is particularly suitable for coating access boxes, door thresholds, spoilers, rear aprons and wheel housings.
Benefits
The easy-to-use spray is particularly designed for small repair tasks and the DIY sector.
Quick drying
Plastic and resin based
Overpaintable
Application
DINITROL 445 Drohnex Spray is a synthetic resin/plastic-based product with anti-drone effect for stone chipping and bodywork protection. The spray is particularly designed for small repair tasks and the DIY sector.
Method of use
Before use, shake the can until the mixing ball can clearly be heard. (Approx. 2 min). Spray the product onto the dry and dust, grease and oil-free surface in an even cross coat at a distance of 25 – 30 cm.
For small surfaces, the product can also be sprayed in a circular movement. If applying thicker layers, allow to dry between coats. The material can be coated once dry. Depending on temperature, humidity and coat thickness, the spray is touch-dry in 30 minutes.
Pre-treatment Substrates
Surface need to be clean, dry and free from corrosion.
Preferably applied on primed surfaces.
Over-Coating / 2-Layer-Application
DINITROL 445 can be overpainted with most common paints but a test is recommended before full scale
application.
For additional information, please consult DINOL GmbH.
Storage
The product should be stored at temperatures between + 15°C and + 25°C. When stored cool and dry, the unopened original containers can be stored for a maximum of 2 years.
Technical Data
Colour black
Base synthetic resin/plastic
Solvent ester/aromatic solvents
Solids content ~ 58%
Density 1.17 g/cm3
Flash point - 4°C
Processing temperature 15°C – 25°C
Yield p. m2 / 0.5 mm approx. 700 g
Recommended film thickness wet 1250 µm
Salt spray test 500 µm dry film – 500 h
Available in 1 L