Liqui Moly Service Kit Petrol Injection Cleaner 300ml & Engine Flush Plus 300ml 1803+8374

£12.99
Tax included. Shipping calculated at checkout.

Don't forget these...

Liqui Moly Petrol Injection Cleaner 300ml
Highly effective combination of agents that cleans and protects. Formulated according to the latest additive and fuel technology. Meets the requirements of modern engines, fuels and operating conditions. Suitable for all gasoline injection systems such as K, KE and L- Jetronic systems, etc.
Properties
- cleans the injection system
- reduces pollutant emissions
- removes carbon deposits from the intake valves and in the combustion chamber
- optimum dosage
- cost-effective due to exact dosage
- guarantees low fuel consumption
- tested for turbochargers and catalytic converters
Areas of application
For rectifying problems such as difficulties with starting, irregular idling, poor throttle response, performance loss, lean surging and poor emissions values caused by contaminated gasoline injection systems. Repeat treatment if problems reoccur. Suitable for all gasoline injection systems. Tested for use with turbochargers and catalytic converters.
Application
300 ml is sufficient for 70 l of fuel. Has a long-term effect of 2,000 km. Can be mixed with fuel at any time since mixing takes place automatically.
VIDEO GUIDE: https://www.youtube.com/watch?v=WHDu3H4s7cs

Liqui Moly Engine Flush Plus 300ml
with the carrier fluid, the highly effective detergent and dispersant additives dissolve sludge and lacquer formers. All types of oil-soluble and oilinsoluble residues are brought into suspension and removed during the next oil change. An engine which has been cleaned of deposits and contamination and which is then filled with fresh oil not contaminated with old impurities can develop its full performance characteristics.
Properties
- optimal engine performance
- highly economical
- tested for turbochargers and catalytic converters
- does not attack common sealing materials
- gentle cleaning
- rapid cleaning
- suitable for diesel particulate filters
- simple to use without disassembly
- minimizes wear
Areas of application
Cleaning and flushing out the oil circuits of gasoline and diesel engines. The use of Engine Flush Plus is dependent on the degree of contamination of the oil circuit. Can be safely used in vehicles with toothed belt running in oil. Not suitable for use on motorbikes with wet clutches.
Application
One 300 ml can is sufficient for up to 6 liters of oil. Add Engine Flush Plus to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush Plus is compatible with all commercially available motor oils.