FREE UK MAINLAND SHIPPING ON ORDERS OVER £50*
Kit contains: 4x 4010 500ML+ Can gun
DINITROL 4010 Corroheat leaves a hard, transparent film that is resistant to both alkali and acids and is heat resistant up to a temperature of 200°C. It has a tack-free and clean film which facilitates a visual inspection of metal surfaces, reading of labels and numbers etc.BENEFITSEngine protectionHigh temperature resistanceHigh adhesionLongterm protectionAPPLICATIONSThe adhesion and flexibility on rubber and plastic parts at both low and high temperatures are very good. Appropriate parts to be treated with DINITROL 4010 Corroheat are engine compartments, engines and other parts which have to withstand high temperatures.METHOD OF USEDINITROL 4010 Corroheat should be applied on a clean, dry surface. High or low pressure equipment can be used, airless or airmix. Application temperature between 15 – 30°C. Product hardness, flexibility and adhesion increases at higher drying temperatures.PRE-TREATMENTSubstrates Surfaces shall be dry, clean and free from corrosion.OVER-COATINGNormally not to be overpainted. For additional information, please consult DINOL GmbH.STORAGEThe product shouldbe stored at 15 – 30°C and the shelf life is then 2 years in unopened original packagesTECHNICAL DATAColour transparent beigeType of film hard, waxyDensity at 23°C 890 kg/m³Viscosity at 23°C, DIN 4 25 secondsDry matter content 47% by weightAromatic part in the solvent 0,5 %Recommended film thickness wet 120 μmRecommended film thickness 40 μmDrying time 120 µm wet, 1 h with optimal ventilation120 µm wet, 4-6 hours at RT 23°C 50% RHLow temperature adhesiont -30°CEffect on car paint noneRemovability within 3 months Hydrocarbon solventsHeat resistanceShort-term 200°CLong-term 160°CSalt spray test (drying 24 h, 80°C) 240 hrs 40 microns dry500 hrs 80 mircrons dryAvailable in 10 L Canister / 20 L Pail / 60 L Drum / 208 L Drum
Redeem your points for discounts
