Ceramizator CP‑B – Petrol Nano‑Ceramic Fuel & Injector Cleaner
Give your petrol engine a fresh start. Ceramizator CP‑B combines powerful detergents with nano‑ceramic lubrication to clean sticky injectors, stabilise the spray pattern and add a protective, low‑friction film inside the fuel system. The result? Smoother running, sharper response and the potential for better MPG – especially on high‑mileage or short‑trip cars.
Why it works
-
Deep clean: Dissolves gums, varnish and carbon fouling in injectors, rails and valves.
-
Nano‑ceramic shield: Creates a microscopic, low‑friction conditioning layer on metal surfaces to reduce wear in pumps and injectors.
-
Better burn: Cleaner, finer atomisation supports more complete combustion and fewer cold‑start hesitations.
Nano‑ceramic technology
Ceramizator uses engineered, inorganic, non‑metallic nano‑ceramic particles – a heat‑resistant engineering material. Under pressure and temperature they help form a thin “tribofilm” on microscopic peaks of metal surfaces in the fuel system upstream of combustion (pump, injector needles, rails). This boundary‑lubricating layer reduces metal‑to‑metal contact and micro‑abrasion, supporting smoother movement, steadier spray and longer component life. The ceramic particles are thermally stable and chemically inert, so they’re designed to work alongside modern fuel chemistries and sensors.
What you’ll notice
-
Improved throttle response and restored power
-
Smoother idle and quieter running
-
Potential MPG gains on like‑for‑like journeys
- Helps lower emissions (ideal before an MOT)
Protects & prolongs
Regular use helps protect injectors and the high‑pressure pump against dry‑fuel wear – reducing friction where petrol’s natural lubricity is low. Ideal for GDI/T‑FSI/TSI engines that are sensitive to deposit build‑up.
How to use
- Add one 10 ml dose to the tank, then refuel with 25–35 litres of petrol.
- Drive normally to circulate. Repeat every 3,000 miles as preventive maintenance.
Good to know
- Safe for catalytic converters and oxygen sensors
- Compatible with E5/E10 petrol
- Does not mask or fix mechanical faults
Note: Will not repair mechanically damaged injectors, pumps or fuel lines.
