High-tech protection for high-performance manual gearboxes.
Ceramizator® is a high quality preparation designed for the protection and revitalization of manual transmissions.
Its innovative formula of intelligent nanoparticles with high surface active capabilities penetrates the structure of the metal, creating a re silient and stable protective layer (ceramic metal layer) with a low coefficient of resistance and excellent heat conductivity properties.
This allows for a significant reduction in friction and provides continuous protection of the compon ents, virtually e liminating the wear and tear process. Regular use significantly extends the lifespan of the gearbox, providing protection for 100,000 KM. It is recommended for all types of manual transmissions.
What are benefits of using Ceramizator CB-M?
- Facilitates gear shifting and the operation of synchronizers.
- Dampens and stabilizes the operation of gearbox mechanisms.
- Eliminates vibrations and noise.
- Regenerates and extends the lifespan of gear shifting, gearboxes, and rear axles.
- Reduces the risk of failures.
- Hardens the outer surface of metal elements and slows down their wear and tear process.
- Forms a durable protective layer with very low friction coefficients and high resistance.
Advanced technology for smoother, longer-lasting gear shifts.
- To achieve the best possible results from using the product, strictly follow the recommendations in the manual.
- The dosage of Ceramizator should be adjusted based on the “NUMBER OF DOSES OF THE PREPARATION” table.
- Using a lower dose of the preparation than recommended in the table may not yield the expected revitalization results.
- Ceramizator is designed for all types of gear oils used in manual transmissions.
- It can be used in both new and older vehicles with mileage over 1000 km.
- Using Ceramizator does not void the vehicle manufacturer’s warranty.
- To maintain manual transmissions in good condition, remember to use Ceramizator regularly as recommended every 100,000 km.
How to use Ceramizator – cutting-edge care for your manual gearbox?
- Warm up the oil in the gearbox to an operating temperature of 80-90%, achieved by driving a short distance of 5 km.
- Turn off the engine.
- Add the appropriate amount of Ceramizator and apply it to the oil filler opening of the manual gearbox.
- Start the engine.
- Drive a consistent distance of 10-15 km, shifting through the gears from the lowest to the highest during this time.
- After driving 10-15 km, normal vehicle use can resume.
- The full process of revitalization and mechanical regeneration will occur after driving an additional 10,000 km.
- Do not change the gearbox oil during this time.
