Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079 - World of Lubricant
Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079 - World of Lubricant
Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079 - World of Lubricant
Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079 - World of Lubricant
Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079 - World of Lubricant
Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079 - World of Lubricant
Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079 - World of Lubricant
Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079 - World of Lubricant

Liqui Moly Brake Anti-Squeal Spray Anti-Seize Grease 400ml Aerosol 3079

£18.99
Tax included. Shipping calculated at checkout.
Size

Product Description

For the entire brake system at disk brake pads, studs, pins as well as contact points for drum brakes. Separating spray for centering rings on aluminum rims, connection points between rims and wheel hubs and other plugged and screwed connections.
Specially developed lubricating and separating spray made from synthetic and ceramic agents. Eliminates squealing noises that occur between brake pistons or contact surfaces and the brake lining.
PROPERTIES
- Good corrosion protection
- Easy to use - eliminates squeaks
- Resistant to road salt and splash water
- Extremely low friction
- Outstanding thermal stability
- Outstandingly adherent
- Ideally suited as a separating paste
AREAS OF APPLICATION
For fitting, repair and maintenance work on brake systems. Used for basic lubrication and as a preventive measure against brake squeals. Highly suitable as a universal spray for numerous applications apart from brake systems.
APPLICATION
With floating brake calipers, first clean all sliding surfaces, channels and contact surfaces using a brush or brake file. Also clean off coarse contaminants on used brake linings, pins and cross springs. Next, clean the brake components with Rapid Cleaner (Part no. 3318). After the solvent has evaporated, spray the cleaned parts with the spray on all sliding surfaces, channels and contact surfaces. After the propellant has evaporated, repeat the process if necessary.
COMMENT: DO NOT UNDER ANY CIRCUMSTANCES ALLOW THE SPRAY TO GET ONTO THE FRICTION SURFACE OF THE BRAKE LINING OR THE BRAKE DISK.