Coating material as wax-based corrosion protection. For repairs and after-treatment of all protective coatings on underbodies. After drying, the waxes and resins contained form a closed corrosion protection film with outstanding adhesive properties. Wax-based products have “self-healing” properties and also adhere to existing PVC underbody coatings.
PROPERTIES
- good corrosion resistance
- good penetration
- “self-repairing” properties
- outstanding rigidity
- can be applied in thick layers
- no aromatic hydrocarbons
AREAS OF APPLICATION
Predominantly for underbodies, fenders and wheel arches after repairs, for the care of PVC underbodies and for the repair of damaged underbodies.
COMMENT
After use, the can should be inverted and sprayed until the valve is clear and only propellant escapes!
Do not spray material onto moving parts and hot components such as mechanical joints, the engine, gearbox, drive shaft, exhaust pipe, catalyst and brake systems.
APPLICATION
Clean the surfaces to be treated thoroughly in advance and remove rust. The surfaces must be dry and free of wax, dirt and grease and largely free of dust. Shake well before use! When the ball has worked loose, continue to shake the can for another minute. Hold the can vertically when spraying and apply the contents thinly from a distance of about 20 – 30 cm. The resistance to abrasion and corrosion increases with increasing coating thickness. For this reason, the spraying process should be repeated once or twice after a short flash-off period.
Recommended application temperature: 20 – 25 °C
