FEATURES & BENEFITS
Valvoline Engine Oil Stop Leak has a direct effect after application.
Positive environmental effect
Prevents pollution of the environment due to uncontrolled loss of engine oil.
Easy to use
Application through simply adding it to the engine oil. No specialist tools or equipment required.
Valvoline Engine Oil Stop Leak is suitable for petrol and diesel engines and all commonly used motor oils and engine seals.
Suitable for all petrol and diesel engines with all commonly used motor oils.
Oil consumption and loss through sweating gaskets is diagnosed.
Add Valvoline Engine Oil Stop Leak to the engine oil and let the engine idle for 10 minutes to ensure adequate mixing.
Do NOT exceed maximum crankcase capacity
Suitable for 5 liters of engine oil. Harmless to the engine up to a maximum concentration of 10% of engine oil.
Add content of the metal bottle (300 ml) to at least 3 liters of engine oil.
Check oil system for leakage.
If leakage persists after approximately 3 days then seals are likely to be damaged and should be replaced.
HEALTH & SAFETY
This product is not likely to present any significant health or safety hazards when properly used in the recommended application and good standards of personal hygiene are maintained.
PROTECT THE ENVIRONMENT
Take used chemical to an authorized collection point. Comply with local regulations. Do not discharge into drains, soil or water.
We recommend to store all packages under cover. Keep container tightly closed and stored in a cool, dry and well ventilated place. Products should be stored inside and do not exposed to direct sunlight and high temperatures. Avoid freezing conditions.
Typical property characteristics are based on current production. Whilst future production will conform to Valvoline specifications, variations in these characteristics may occur.
Appearance Light yellow
Specific Gravity @ 20oC 0,87
Flash Point, °C > 200