Low viscosity corrosion inhibitor for cavity sealing. Water-repellent, with excellent penetration properties and “self-healing effect”. Very finely atomized during spraying, has outstanding creep properties and penetrates well into narrow gaps which need protection (such as sheet metal folds). A slightly sticky wax coating remains after drying.
- outstanding thermal stability
- good corrosion resistance
- good penetration
- no aromatic hydrocarbons
- penetrates and drives out moisture
AREAS OF APPLICATION
As corrosion protection coating of cavities on doors, hoods, crossmembers, reinforcements, etc. in passenger cars, commercial vehicles or as a universal corrosion protection product for machines, machine components and other tools.
After use, the valve of the can should be sprayed empty upside down until only propellant gas escapes!
Clean the surfaces to be treated thoroughly in advance and remove rust. The surfaces must be dry and free of wax, dirt and grease and largely free of dust. Shake well before use! When the ball has worked loose, continue to shake the can for another minute. Hold the can vertically and spray at a distance of about 20 – 30 cm from the surface.
Optimum creep effect at an application temperature of 20 – 25 °C.