BMW 5 E60 E61 525d 530d FEBI FILTERS LIQUI MOLY ENGINE OIL BMW01

TO FIT:

BMW 5 E60 E61 525d 530d (2001-2010) MODELS

Liqui Moly MOLYGEN NEW GENERATION 5W-30 DPF C2/C3 VW BMW AUDI PORSCHE 21225 6L
Low-friction motor oil based on synthetic technology. With innovative MFC wear-protection technology and extremely high power reserve for maximum performance. Good dirt suspending and cleaning capacity ensures optimum engine cleanliness. This leads to fuel savings and ensures reliable operation as well as the maximum service life of the diesel particulate filter (DPF) and engine. Exceeds the test requirements of well-known vehicle manufacturers. 

PROPERTIES
- smooth engine running
- excellent wear protection
- outstanding lubrication reliability
- high shear stability
- ensures a long engine life
- reduces fuel consumption
- outstanding engine cleanliness
- rapid oil delivery at low temperatures
- optimum stability to aging
- optimum oil pressure under all operating conditions
- especially suitable for vehicles with diesel particulate filter
- tested for turbochargers and catalytic converters
- miscible with all commercially available motor oils
LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:
ACEA C2
ACEA C3
API SN
BMW Longlife-04 (bis MJ 2018)
Fiat 9.55535-S3
Hyundai
Kia
MB 229.31
MB 229.51
MB 229.52
Opel GM-LL-A-025
Opel GM-LL-B-025
AREAS OF APPLICATION
For gasoline and diesel engines including common rail technology. Particularly suited for vehicles with a diesel particulate filter (DPF), also for retrofits. Tested for use with turbochargers and catalytic converters. 
APPLICATION
The operating instructions of the vehicle and engine manufacturers must be followed. Can be mixed with all commercially-available motor oils. Optimum effect obtained only when used on its own (i.e. no mixing).
 
Liqui Moly MOLYGEN 5W-40 NEW GENERATION ACEA A3/B4 VW BMW AUDI PORSCHE 8536 6 L
Low-viscosity high-tech low-friction motor oil with high shear stability. Combined with innovative additive technology and the special Molygen additive. Reliably prevents the formation of deposits, reduces frictional losses in the engine and provides optimum protection against wear. The results are savings in fuel and an extended service life for the engine.

PROPERTIES
- outstanding engine cleanliness
- excellent high and low temperature behavior
- friction and wear reducing
- optimum stability to aging
- excellent wear protection
- miscible with all commercially available motor oils
- outstanding lubrication reliability
- high shear stability
- tested for turbochargers and catalytic converters
- rapid oil delivery at low temperatures 
LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:
ACEA A3
ACEA B4
API SN
BMW Longlife-01 (bis MJ 2018)
Fiat 9.55535-H2
Fiat 9.55535-N2
Fiat 9.55535-Z2
MB 229.5
Opel GM-LL-B-025
Porsche A40
Renault RN 0700
Renault RN 0710
VW 502 00
VW 505 00
AREAS OF APPLICATION
Best for modern gasoline and diesel engines with and without exhaust gas turbochargers. For the protection and value retention of the engine during long intervals between oil changes and with high loads. 
APPLICATION
Note the vehicle and engine manufacturers' operating instructions. Can be mixed with all commercially available motor oils. Full effectiveness only achieved when the product is used on its own (i.e. no mixing).