DINITROL 538+ BLACK BODY & GLASS 1 STEP PRIMER AND ACTIVATOR 30ml 1240400

The primer DINITROL 538 plus is a "one-step primer" with additional functions for wafer bonding with polyurethanes. DINITROL 538 plus is a primer designed as a pre-treatment in replacing polyurethane direct-glazed automotive glass parts and other substrates.
DINITROL 538 plus is a solvent containing, physically and chemical drying black primer which promotes the adhesion between the glass / paint surface and the direct glazing adhesive and acts as a UV protection. DINITROL 538 plus combines the following functions in one product:

• one-step glass-frit primer for the ceramic coating
• Pre-treatment of RIM and paints
• long life primer (no reaction within 3 month)
• inhibits rust in small nicks and scratches
• compatible with all DINOL adhesive systems

Application:
Before use of the primer DINITROL 538 plus, shake the bottle thoroughly until paint mixing balls
rattle freely. Mix for an additional one minute. The application of the primer DINITROL 538 plus can
be done manually by felt and/or an adequate tool.
Important Note:
Due to its reactivity with moisture, the primer has to be used within 1 week after bottle has been
opened. (if properly sealed) DINITROL 538 plus should not be used if the product has remained
opened for an extended amount of time. Replace inner seal and cap tightly and immediately after
each use to ensure maximum shelf life.
This product is suitable for experienced professional users only.

Storage:
Storage between 0 and 35°C, in closed packaging in a dry and ventilated area.